🔨🟫🟫 Solid Wood Flooring Oak, Hickory, Pine - [Mill Direct!] - general for sale - by dealer - craigslist (2024)

‹ image 1 of 24 ›

🔨🟫🟫 Solid Wood Flooring Oak, Hickory, Pine - [Mill Direct!] - general for sale - by dealer - craigslist (1)

Custom Cut Millwork - 502 Rusk Ave. suite 1 near across the highway from county road 2743 )

google map

condition: new

make / manufacturer: Custom Cut Millwork

more ads by this user

QR Code Link to This Post

Solid Hardwood and Pine Plank Flooring - Manufacturer Direct

Wells, TX


Hardwood tongue and groove flooring is very decorative and has a natural friendly appeal. It is durable and has excellent impact resistant qualities.

Hardwood flooring is a good investment. Unlike almost any other type of flooring or carpet, hardwood flooring can last a lifetime. After it is installed if the need arises it can be repaired, refinished sanded again and have applied a fresh coat of polyurethane, stain or other coating. The floor can be refinished several times. It is not uncommon to hear of hardwood floors still in good condition that are near an hundred years old.

Plank flooring is one name for this type of solid wood flooring we produce. We have two standard flooring profiles. They are 3 1/2 and 5 1/2 wide. We also have on hand 2 inch strip oak flooring.

We offer different types of wood flooring. These are Red Oak, White Oak, mixed Oak, Walnut, Pecan, Hickory and Southern Yellow Pine (softwood). Per special request we can cut Walnut, Ash, Sweet Gum or other types of flooring. It is not common but we have had people order cedar flooring which is very beautiful but on the soft side. If someone wanted they could use a thick coat of something like marine polyurethane or epoxy and create a hard surface.

We offer to the public kiln dried, solid wood flooring. This is the real tried and true flooring lumber pattern of good flooring. This is not plywood or laminate glue flooring. We take the lumber through each stage. We take raw saw logs, cut them into rough cut board, edge them to the right width and take it through a kiln drying process. The lumber is then planed, sent through the wood shaper, molder, graded, packaged and if need be we can deliver it right to your location.

Our flooring is sold unfinished. It will need to be sanded on site after it is installed in order to get the smooth over all matching floor surface. It can than be finished with a stain, polyurethane or a floor paint.

Our mixed oak flooring is often made up of a few different native oak species in the Red and White Oak wood categories. Flooring often comes out in the finished product in many different colors and shades. These colors can be light pink, purple / brown, white, cream, reddish brown, light brown, bits of black, peach, yellow, greenish yellow olive tone, and more. So plenty of interest here.

Call and we can discuss the flooring type that is best for your project.

Oak hardwood flooring tongue and groove $3.00 sq ft for 4", ungraded run-of-the-mill quality

Oak hardwood flooring tongue and groove $4.00 a sq ft for 6", ungraded run-of-the-mill quality

We also offer PINE FLOORING. This is a softer wood than Oak or Walnut but is also easier to work with, is less cost and in its natural state offers a yellow with at times some grey or orange color pattern to a floor. Pine flooring readily accepts stain. Some people like apply stain to their pine flooring to match with their interior.

T&G Pine flooring 1x4 or 1x6 $2.00 a sq ft

🔨🔨 Need Installation of your wood flooring? We offer installation service. 🪚🪚

= = = = = = = = = =
Need a different kind of shaped wood product? Look over just some of our more popular products produced by Custom Cut Millwork. In addition to Flooring we also offer wood Siding, Paneling, Cedar Shingles and Trim.

- Siding: Shiplap in 4”, 6” and 8” widths, #105 Dutch Lap also called Cove Lap, # 117 Wash board or double tear drop lap siding to represent clapboard siding. Quarter log siding also called tongue and groove D Log cabin siding.

- Wall Paneling and Ceiling covering: V - Joint or ship lap in 3 1/2 inch and 5 1/2 inch widths, bead board and mid rib v board ( both these last two are variation patterns of kinds of grooves made in the exposed face.

- Shaped Decking products: We make various sizes and patterns of oak Shiplap and tongue and groove trailer decking, rail road box car flooring and dry van freight trailer flooring.

For outdoor home style decks, patios and ramps we make a surfaced on 4 sides cedar board decking with rounded corners.

- Cedar Shingles and Shakes: call for custom designs including dog eared, rounded, square and rustic. We mostly provide shingles for interior wall covering, accent walls, sign backing, interior display roofs, gables and exterior siding.

- Trim: We offer baseboard, cove, quarter round, crown molding, simple design s4s planned lumber and more.

= = = = = = = = = = = = = =

Custom Cut MILLWORK is located at 502 Rusk Avenue suite 1 in Wells, Texas 75976. The facility is right off highway 69 across the highway from county road 2743. Wells is positioned right along the Highway 69 route halfway between Dallas and Houston. East Texas is one of the best wooded areas of the state and grows some very fine quality wood which we are pleased to provide mill direct to the public.

We can deliver to customers in the local towns and cities of Dallas, Fort Worth, Denton, Plano, Garland, Mesquite, Arlington, Irving, Abilene, Sulphur Springs, Texarkana, Mount Pleasant, Tyler, Mineola, Lindale, Kilgore, Longview, Marshall, Henderson, Carthage, Shreveport, Athens, Corsicana, Jacksonville, Palestine, Crockett, Rusk, Bullard, Wells, Alto, Nacogdoches, Mount Enterprise, Timpson, Center, Huntington, Zavalla, Diboll, Corrigan, Woodville, Lufkin, Beaumont, Killeen, Jerrell, Austin, Temple, Round Rock, Lakeway, San Marcos, New Braunfels, San Antonio, Seguin, Victoria, Sweeny, Corpus Christi, Huntsville, Livingston, Conroe, Houston, Lake Charles, Seabrook, Galveston, and more.
We serve the nearby states of Oklahoma, Louisiana, Tennessee, Arkansas, Alabama, Mississippi, Florida, Kansas, Missouri, New Mexico, and Colorado and can send trucks anywhere in the lower 48 states.

= = = = = = = = = = = = =

Mill direct pricing to the public.
We accept major credit cards.
Truck shipping delivery available 🚚

Custom Cut Millwork
Office hours Monday - Friday 8 am to 4 pm

Call or text the planner shop office

Email infoATcustomcutmillwork.shop
[note, replace “AT” with @ ]


*** Para Espanol: (Spanish)
Clientes que hablan español por favor dejen un mensaje de voz que indique lo que necesita en nuestro teléfono de la oficina (936) 221-583uno. Intentaremos comunicarnos con usted lo antes posible.

Need a different kind of Lumber?
You can contact our affiliated Sawmill log processing facility Custom Cut Lumber in Alto, Texas. www.CustomCutLumberMill.com.
They provide cedar, pine and hardwood lumber. Oak trailer decking, pine framing lumber, pallet boards, wood siding (near 10 different types), cedar lumber, fence posts, beams up to 32 feet long, live edge slabs and much more.


Key words: 2x4, 2x6, Building materials, supplies, wood product, outlet, distributor, beam, sale, sawmill, sawing, service, portable, molder, molding, trim, logs to lumber, rough cut lumber, planned boards, plank, logging, forestry, land clearing, farm, ranch, commercial, industrial, horse, stall, corral, cattle, hay, barn, garden, trellis, pergola, outdoor cooking area, masonry, pillar, pillars, post, firewood, splitter, gate, hill country, lot, land, build to suite, reality, property, sale, rent, lease, subdivision, estate, survey, surveying, crushed, concrete, asphalt, grindings, clay base, pallet, pallets, crate, tree, log cabin, mobile home, manufactured, gravel, rock, sod, landscape, business, shop, shed, garage, door, window, deck, paneling, v joint, v-joint, vjoint, shiplap, ceiling, siding, deck, stairs, stair, ramp, storage, house, home, tiny, pool, creek, lake front, pond, dock, boat, fishing, fish, hunting, deer, stand, ATV, motorcycle, four wheeler, bike, RV, motor home, discount, discounted, sale, percent % off, deal, cost, clearance, tool, tools, table chop saw, hammer, jack, tape measure, level, ladder, scaffolding, air compressor, generator, dewalt drill, belt sander, bandsaw, scroll, miter, echo, stihl, chainsaw, 4x4, John Deere, skid steer, forklift, crane, man lift, box, fence, bush hog, tractor, mowing, mulching, gas, oil, electric, conduit, battery, diesel, machine, gooseneck, oilfield, pipe line, water, low boy heavy hauler, truck, trailer, cargo, carport, metal roofing, sheet, sheeting, shingles, cinder blocks, block, brick, salvage, reclaimed, reclaim, demolition, used, new, truss, trusses, joist, iron work, timber frame, framing, retaining wall, oak, pine, walnut, redwood, cedar, treated lumber, syp, 1/2 inch plywood, drywall, mud, float, sheet rock, osb, kiln dried, tar paper, hardie board, plank, fiber cement, insulation, fiberglass, blow, spray, foam, attic, ac, air conditioner, cooling, furnace, wire, skylight, chimney, vent, light, wall, foundation, plumbing, pipe, toilet, bath, bathroom, tub, shower, kitchen, cabinet, cabinets, vanity, cupboard, shelf, shelves, carpet, padding, vinyl, snap lock, linoleum, paint, painting, primer, brush, roller, spray, stain, meter, breaker box, circuit, pole, fireplace, heater, hot water, appliance, washer, dryer, stove, countertop, granite, marble, quartz, polished, tile, ceramic, table, work bench, hobby, wood turning, carving, wood picture frames, bracket, plate, nails, screws, bolts, hardware, contractor, builder, blueprint, draft, woodworking, repair, remodel, carpentry

    post id: 7754011912


    ♥ best of [?]

    🔨🟫🟫 Solid Wood Flooring Oak, Hickory, Pine - [Mill Direct!] - general for sale - by dealer - craigslist (2024)


    Which is better hickory or oak flooring? ›

    So, hickory is generally harder and more durable than oak. However, oak is more resistant to dents and scratches.

    Can you get real wood flooring? ›

    You can purchase your solid hardwood floors either prefinished or unfinished. Prefinished hardwood floors have a coating that protects them and they're ready to install right out of the box. Unfinished hardwoods allow you to apply your own stain color.

    Is hickory expensive wood? ›

    Hickory Can Cost More Than Other Hardwoods

    So it comes down to supply and demand. There are more oak and maple trees, so the cost per square foot of those flooring options is less than hickory.

    Are hickory wood floors good? ›

    Yes, hickory scores 1820 on the Janka hardness scale—making it the second hardest wood flooring in the US. Its durability is nearly unmatched. Hickory is very resilient and hard to scratch. Also, hickory is easy to maintain, offers unique colors, and is less expensive than exotic woods.

    What type of wood flooring is best? ›

    White oak is one of the more durable domestic hardwoods available. On the Janka scale, white oak is rated at 1360, behind only hickory and maple. But durability is more than just hardness. White oak accepts finishes and stains quite well, which further protect it.

    What is the best type of flooring? ›

    Durable and moisture-resistant choices like ceramic tile, porcelain tile, vinyl plank, linoleum, or engineered hardwood work best in the kitchen. Waterproof tile, vinyl, linoleum, and rubber floors are ideal for humid bathroom spaces. Plush or frieze carpeting helps provide a quiet, cozy bedroom environment.

    Which floor is better hardwood or laminate? ›

    Hardwood flooring is better for appearance, lifespan and resale value. Laminate flooring is better for cost, ease of installation and comfort. Overall, hardwood flooring is considered to be better than laminate flooring since it is a complete floor material, not simply a floor covering.

    What are the disadvantages of hickory wood? ›

    Hickory's density does make it challenging to install. Solid, unfinished hickory flooring's pros may be exceeded by its cons for anyone other than hardwood flooring professionals. The hardness makes cutting and sanding a bit challenging, and the dense grain further complicates staining and finishing efforts.

    What is the most desirable wood flooring? ›

    Here are some of the most popular hardwood species, according to our research:
    • Cherry.
    • Hickory.
    • Maple.
    • Oak.
    • Walnut.
    Feb 21, 2024

    Is oak softer than hickory? ›

    White oak has a linear grain with underlying hues that range from golden brown to slightly gray, making it versatile for various stains and styling techniques—from a contemporary feel to a rustic look. Though less hard than hickory, oak is actually the standard for high-traffic areas with a 1300 Janka hardness rating.

    Which wood is the most durable for flooring? ›

    The hardest wood commonly used for flooring is Hickory, which has a rating of 1820 on the Janka wood hardness chart.


    Top Articles
    Latest Posts
    Article information

    Author: Dan Stracke

    Last Updated:

    Views: 5823

    Rating: 4.2 / 5 (43 voted)

    Reviews: 90% of readers found this page helpful

    Author information

    Name: Dan Stracke

    Birthday: 1992-08-25

    Address: 2253 Brown Springs, East Alla, OH 38634-0309

    Phone: +398735162064

    Job: Investor Government Associate

    Hobby: Shopping, LARPing, Scrapbooking, Surfing, Slacklining, Dance, Glassblowing

    Introduction: My name is Dan Stracke, I am a homely, gleaming, glamorous, inquisitive, homely, gorgeous, light person who loves writing and wants to share my knowledge and understanding with you.